Network Configuration

Fermi Notes
If you've gotten this far, everything is usually correct.
If you need to change these settings, please put the machines full hostname in the Hostname section. (ie. myhostname.fnal.gov instead of myhostname). This will ensure that the installation will work correctly, as well as help other programs that sometimes need the full hostname.
If needed, here is the Name Servers IP addresses.
Primary DNS:131.225.8.120
Secondary DNS:131.225.17.150

Installation Help
Any network devices you have on the system will be automatically detected by the installation program and shown in the Network Devices list.

To configure the network device, first select the device and then click Edit. In the Edit Interface screen, you can choose to have the IP and Netmask information configured by DHCP or you can enter it manually. You can also choose to make the device active at boot time.

If you do not have DHCP client access or are unsure as to what this information is, please contact your Network Administrator.

If your system is part of a larger network where hostnames are assigned by DHCP, select automatically via DHCP. Otherwise, select manually and enter in an FQHN-based hostname for your system (such as name.example.com). If you do not, your system will be known as "localhost".

Finally, if you entered the IP and Netmask information manually, you may also enter the Gateway address and the Primary, Secondary, and Tertiary DNS addresses.